Model 2640 multi - cylinder kraft paper machine, paper packaging machine, corrugated paper machine
Supply 2640 multi - cylinder multi - net paper machine, paper packaging machine, corrugated paper machine
Model 2640 corrugated paper machine
1. Varieties: all kinds of corrugated paper.
2. Writing quantitative: 40 g / ㎡
3. Clear paper width: 2640mm
4. Design speed: 110m/min
5. Working speed: 70-100m/min
6. Gauge: 3500mm
7. Transmission mode: separate transmission and variable frequency speed regulation.
8. Arrangement: left and right mobile phones (provided by users)
Iii. Main equipment structure
1. Turn back department: turn back roll? 400 x3100mm one, with 14 mm seamless steel tube wall thickness pack glue, rubber hardness 2 ° to 95 ° +, encapsulates the thickness 15 mm, with 113520 bearing, roll back frame for single mast.
2. Network department:? 2 sets of stainless steel mesh cage of 1500mmX3050mm, 1.2mm thick, 10mm spacing, sealed shaft housing, with 113520 bearings. ? Article 420 x3050mm coucher 2, using 12 mm seamless steel tube plastic bags, rubber hardness 38 ° plus or minus 2 °, encapsulates the thickness of 25 mm thick, with 113518 bearing.
3. Water squeeze department: all upper and lower rollers? 350 x3050mm, roller rubber hardness on 2 ° to 90 ° +, under the roller rubber hardness is 80 ° plus or minus 2 ° high 0.3 mm. The thickness of all the wrappers is 15mm. Equipped with mechanical pressure device and 113520 bearings.
4. Main pressure part: upper stone roller? One piece, 550X3050mm, with scraper and? Cylinder unit 320. The rubber roller? 500 x3050mm a, rubber hardness 90 ° plus or minus 2 ° encapsulates the 22 mm, the thickness of bearing high 0.6 mm with 113626/113630.
5. Roller department:? One rubber roller of 500X3050mm. Rubber hardness 2 ° to 90 ° +, encapsulates the 22 mm, the thickness of the high of 0.8 mm, with? 320tri-corrugated air tube with 113630 bearings.
A blanket set
7. Drying department:? There are three 2500X3050mm dryer. For internal and external processing, the surface roughness is less than or equal to 0.4, and the hardness of the surface HB is greater than or equal to 200. Two scraper blades, a cylinder with double air cover, 3113156 bearing and M12X170 tooth wheel are used.
Burnish department: two cylinders? 400 a x3050mm pressure roller, rubber hardness 2 ° to 95 ° +, 22 mm thick, with? 200 cylinder device, with 113622 bearings.
9. Three sets of manual calibrators, three sets of toothed box blanket tighteners, and two stretch rolls. Wet section, cadre guide roll? Complete with 194X3050mm and bearing 309/310, all the guide rolls are made of 10mm seamless steel pipe and made of cast iron. Spring roll? Two bearings, bearing 307.
10. Foundation department: back, network department, water extrusion, second cylinder, light pressure, roll paper with single groove foundation plate. One cylinder, the main pressure with three trough foundation plate. The ground glue silk, the mat iron is complete, the drying cylinder frame is the box type.
Driving department: 5 driving points, main pressure, 1 cylinder, 2 cylinders with 500 reducer. Light press with 400 reducer, paper roll with 350 reducer. The coupling, pinion, and transmission rail are fitted together
12. Vacuum department: two empty boxes, made of hot-pressed steel plate by welding, and the panel material is polyethylene plastic.
13. Control department: press y200l-4-30kw motor for the main press, press y180l-4-22kw for one cylinder and two cylinders, press y160l-4-15kw motor for the light press, and y132s-4-5.5kw motor for the paper reel.
14. Bearing tile shop, luoyang, Harbin bearing.
15. The supplier shall provide basic drawings, general equipment drawings, inspection and verification of pressure vessels, and list of goods to be shipped.
Sales manager: hao yingfeng 86-13603894288